|
|
- Suitable for all stroke lengths
- for profile 90x90S
- 90x180
|
- 1. Drill profile as shown in dimensions table
- 2. Fit 2 retainers on the cylinder and push
- into the profile chamber Ø 32
- 3. Make a centring hole in the retainers
- (through hole distance X),
- then fix with a setscrew
- 4. Screw the guide tube into the base plate,
- push into the profile and fix
- When installing in a profile 45x90S,
- please use fixing set 45 part. no. 27.0005/0
- When installing in a profile 90x90S,
- please use fixing set 45 part. no. 27.0006/0
|
