- Aluminium, anodized E6/EV1
- From profile 19 x 32
- 1 Clamping plate
- 2 hex socket cap screws
- 2 suitable end caps, one of them bored
- Weight = 0.150 kg/piece
|
- Fixing the wire cable ( 211777/0)
- on the door element of a lifting door
|
- Remove the lower end cap
- Attach rope clamp with fastening kit
- at the top of the door element
- Pull the rope through the bore
- Adjust balance weight to desired position
- Place the cable
- end around the clamping bar in the loop
- insert it into the groove of the cable clamp
- and secure with a threaded pin
- If necessary, shorten the projecting end
- of the rope and
- replace the removed cap
|