- Aluminium, extruded, anodized E6/EV1
- Shaft supporting profile L16 without bore
- Please order design
- with bore at (280019/1)
- grid dimension A = 250 mm
- Weight = 0.845 kg/m
- Bar length = 6 m
|
- MiniTec linear guide LR16
|
- Bore ΓΈ 8.5 in the
- Recommended distance:
- 50 mm from the edge,
- then approximately
- every 200 - 300 mm
- Fasten to the support profile
- using cylinder screw M8 x 30
- and sliding nut M8.
- Hammer the shaft
- into the rod holder profile
- with a plastic hammer
|