- Aluminium with shaft made of steel
- Turned round
- Shaft journal max. Ø 25 mm
- Please specify dimension L (belt width)
- as well as dimensions A, B, C, D and E (if > ø 25 mm)
- Attention: L is not the outer diameter
- Weight = (basic weight) approx. 0.7 kg
- Extra weight = 1.506 kg/100 mm belt width
|
- MiniTec belt conveyor system
- Use fitting drum bearing 21.0985/0
- Upon request, we can supply the drum
- with mounted ball bearings.
- The bearings are hot pressed
- in a material-friendly manner.
- In addition, please order
- the following part no. 210902/0.
|
- Insert belt driving cylinder in conveyor bearing
- with bore part no. 21.0985/1
- Mount drum bearing at opposite part 21.0985/0
- The drum is sealed between the inner rings
- of the self-aligning bearing
- and the drum bearing
|