- Aluminium, grey
- With bore for drive adapter
- Self-aligning bearing with bore ø 17 mm,
- Version in aluminium GD,
- with stainless bearing and fastening kit,
- conveyor bearing 45 H, 21.0993/6
- Weight = 0.287 kg/piece
|
- Reversing unit and
- driving drums bearing of conveyor belts
- Attachment of plug in motors
- or chain wheels to through
- shaft up to max. Ø 17 mm
- Can be retrofitted
- with intervention protection 21.0909/9
|
- Pre-mount drum bearing to profile end
- When using swivel plates 29.5001/0
- for mounting the substructure,
- these serve as counter-bearings
- for clamping, otherwise
- use multi-block
- or mounting angle bracket
- Tighten the conveyor belt
- by unscrewing the set screw,
- if necessary reset the tool
- Firmly tighten the drum bearing
- (recommended tightening torque: 25 Nm)
|
