- Self-aligning bearing
- with bore ø 17 mm,
- sealed on both sides
- weight = 0.287 kg/piece
|
- Reversing unit and
- driving drums bearing of conveyor belts
|
- Pre-mount drum bearing to profile end
- When using swivel plates 29.5001/0
- for mounting the substructure,
- these serve as counter-bearings
- for clamping, otherwise
- use multi-block
- or mounting angle bracket
- Tighten the conveyor belt
- by unscrewing the set screw,
- if necessary reset the tool
- Firmly tighten the drum bearing
- Recommended tightening torque: 25 Nm
|