Belt driving cylinder 90

       Assembly:                                                           

• Aluminium with shaft made of steel
• Turned round
• Shaft journal max. Ø 25 mm
• Please specify dimension L (belt width)
• as well as dimensions A, B, C, D and E (if > ø 25 mm)
• Attention: L is not the outer diameter
  • of the conveyor Ø95
• Weight = (basic weight) approx. 0.7 kg
• Extra weight = 1.506 kg/100 mm belt width

• MiniTec belt conveyor system
• Use fitting drum bearing 21.0985/0
  • and 21.0985/1
• Upon request, we can supply the drum
  • with mounted ball bearings.
  • The bearings are hot pressed
  • in a material-friendly manner.
  • In addition, please order
  • the following part no. 210902/0.

• Insert belt driving cylinder in conveyor bearing
  • with bore part no. 21.0985/1
• Mount drum bearing at opposite part 21.0985/0
• The drum is sealed between the inner rings
  • of the self-aligning bearing
  • and the drum bearing