Cable clamp

       Assembly:                                                            

• Aluminium, anodized E6/EV1
• From profile 19 x 32
• 1 Clamping plate
• 2 hex socket cap screws
  • with square nuts
• 2 suitable end caps, one of them bored
• Weight = 0.150 kg/piece

• Fixing the wire cable ( 211777/0)
  • on the door element of a lifting door

• Remove the lower end cap
• Attach rope clamp with fastening kit
  • at the top of the door element
• Pull the rope through the bore
  • of the upper end cap
• Adjust balance weight to desired position
• Place the cable
  • end around the clamping bar in the loop
  • insert it into the groove of the cable clamp
  • and secure with a threaded pin
• If necessary, shorten the projecting end
  • of the rope and
  • replace the removed cap