Drum bearing 45

       Assembly:                                                      

• Aluminium, grey
• Self-aligning bearing with bore ø 17 mm,
  • sealed on both sides
• Version in aluminium GD,
  • with stainless bearing and fastening kit,
  • conveyor bearing 45 H, 21.0993/5
• Stainless version, conveyor bearing 45 VA,
  • part no. 21.0979/0
• Weight = 0.287 kg/piece

• Reversing unit and
  • driving drums bearing
  • of conveyor belts
• Drum storage 45 with intervention protection
  • part no. 21.0909/0
• In the rust-resistant drum bearings
  • the intervention protection
  • can be retrofitted 21.0909/9

• Pre-mount drum bearing
  • to profile end
• When using swivel plates part no. 29.5001/0
  • for mounting the substructure,
  • these serve as counter-bearings
  • for clamping, otherwise
  • use multi-block
  • or mounting angle bracket
• Tighten the conveyor belt
  • by unscrewing the set screw,
  • if necessary reset the tool
• Firmly tighten the drum bearing
• (recommended tightening torque: 25 Nm)